Wednesday, 27 August 2014

Installing a DStv system could be quite a challenging task considering the many technicalities involved. Basically, all we need is a satellite dish pan properly positioned to face up to a satellite in space. We also need a signal capturing device known as the LNB fixed on the dish which transmits the captured signals down to our decoders via connection cables, then unto our televisions.
 
In this post, I shall explain to you in details how to install a DStv satellite dish. Setting up your DStv system usually require a degree of technical expertise to achieve the best result. Therefore in doing this effectively, certain rules need to be observed. The dish pan comes with smaller pieces of accessories, which must be knotted in place properly to attain the balance and accurate positioning of the dish pan to the air space above.
 
To avoid any form of obstacle in receiving your satellite signal, there must be an free open space between the satellite dish and the sky above to ensure maximum contact between the dish pan and the space satellite. If this is achieved, the satellite dish receives its signals directly from space satellite without hindrance.
 
After fixing the accessories and the dish pan into position, an appropriate tracking signal meter is connected while the dish pan is swiveled or skewed in different directions. This meter must have its parameters set to reflect the network parameters of the DStv signal. This ensures that the signal meter detects the presence of DStv signal when the position of the dish jams upon a signal point from the satellite.
 
Once signal is tracked, the dish must be locked unto that position and its nuts and screws tightened in place. For a digital signal tracker, it has the capacity to test the efficacy of the signal discovered via its LED screen, by which you can watch the DStv advert or free channel – Dish on TV.

Via the LNB connection point, draw the cable wire down to your decoder and connect it through the LNB – IN port behind your decoder. All is not set yet…always ensure that your installation work has a great mark for neatness. It has a way of appealing to the eyes as well as preserving the dish in that signal-rich position for a very long time.
 

When you deploy an analogue satellite finder, the indicator reading and the high pitch sound indicates the presence of a satellite signal. However, one needs to verify the authenticity of this signal because it could be another digital satellite signal different from the DStv signal.

Nevertheless, lock up your dish on such position and let your decoder scan through. If this goes successfully, congratulations! You have done it.

If you intend to be perfect in installing a DStv satellite dish with all the twists and turns of setting up your DStv system, then you need to practice it regularly. More practice will make you faster in the technical procedures as well as giving you the desired results. One big thing about choosing your dish position is the habitual direction of wind flow. Try to avoid locations that receive direct and less supportive impact of the wind as this could be detrimental to signal stability.

0 comments:

Post a Comment

Followers

Translate to your Language

RECENT COMMENTS

Selectable text below
Recent conversations My DigiTech Media Blog

SUBSCRIBE TO FREE POST ALERTS

It is FREE!
Enter your email address:



Delivered by FeedBurner

IMPORTANT: After Email submission,
go to your inbox and
click on the link sent to you to complete your enlistment

Popular Posts

BECOME OUR FACEBOOK FAN